Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® Clear G170 - PA* - ARKEMA

Check here, which other Rilsan Clear datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

PA,,MT,C12-020

Rilsan^® Clear G170 is a high performance transparent polyamide resin with outstanding thermal resistance.  This grade has been designed for injection molding applications.

Main applications:

• Coffee machine, Fuel filter container, Inner layer of fiber optic, Copper telephone cables resistant to rodents, power cables resistant to rodents.
• Note: This grade is not recommended by Arkema for usage in medical applications. For such applications Rilsan^® Clear G170 MED should be used.

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.

加工/物理特性	干 / 已调节	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	2 / *	cm³/10min	ISO 1133
温度	275 / *	°C	-
载荷	2.16 / *	kg	-
模塑收缩率, 平行	0.7 / *	%	ISO 294-4, 2577
模塑收缩率, 垂直	0.7 / *	%	ISO 294-4, 2577

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	2100 / 2020	MPa	ISO 527
屈服应力	76 / 74	MPa	ISO 527
屈服伸长率	8 / 9	%	ISO 527
名义断裂伸长率	>50 / >50	%	ISO 527
简支梁缺口冲击强度, +23°C	- / 13	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	- / 13	kJ/m²	ISO 179/1eA
肖氏硬度D	79 / *	-	ISO 7619-1

热性能	干 / 已调节	单位	Test Standard
ISO数据
玻璃化转变温度, 10°C/min	168 / *	°C	ISO 11357-1/-2
热变形温度, 1.80 MPa	136 / *	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	150 / *	°C	ISO 75-1/-2
维卡软化温度, B	160 / *	°C	ISO 306
线性热膨胀系数, 平行	70 / *	E-6/K	ISO 11359-1/-2
1.5mm名义厚度时的燃烧性	V-2 / *	class	IEC 60695-11-10
测试用试样的厚度	1.6 / *	mm	-
Yellow Card 现存	是的 / *	-	-
燃烧性－氧指数	26 / *	%	ISO 4589-1/-2

电性能	干 / 已调节	单位	Test Standard
ISO数据
体积电阻率	- / 1E11	Ohm*m	IEC 62631-3-1
表面电阻率	* / 1E12	Ohm	IEC 62631-3-2
介电强度	- / 50	kV/mm	IEC 60243-1
相对漏电起痕指数	* / 600	-	IEC 60112

其它性能	干 / 已调节	单位	Test Standard
吸水性	3.8 / *	%	类似ISO 62
吸湿性	1.7 / *	%	类似ISO 62
密度	1050 / 1050	kg/m³	ISO 1183

函数

典型数据

加工方法

注塑, 其它挤出成型

供货形式

粒料

特殊性能

透明.

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

Injection molding conditions:
- Typical melt temperature  (Min / Recommended / Max)  : 270°C / 290°C / 310°C.
- Typical mold temperature  : 40 - 80 °C.
- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C.

薄膜挤出成型

Extrusion conditions:
- Typical melt temperature  (Min / Recommended / Max)  : 270°C / 280°C / 290°C
- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.